Address
304 North Cardinal
St. Dorchester Center, MA 02124
Work Hours
Monday to Friday: 7AM - 7PM
Weekend: 10AM - 5PM
Drone Cleaning for Solar Panels, Wind Turbines, Insulators & Towers,Roofs
DJI FlyCart 30 (FC30) platform + specialized cleaning payloads,A high-pressure aerial washing system designed for stable, close-range cleaning on complex, hard-to-access assets—improving safety, efficiency, and cleaning consistency for O&M teams.
Built for Safer, More Consistent Aerial Washing
When cleaning performance depends on holding a stable posture near surfaces, control and safety matter as much as pressure. This system combines stabilized close-range operation, precise distance awareness, and modular washing tools to help teams clean more assets with less risk and less setup time.
Stability Under Recoil
Tactile sensing and adaptive balancing help suppress oscillation and maintain a steady washing posture in real conditions.
Close-Range Safety Buffer
A compliant structure helps absorb unexpected contact, reducing the risk of damage to the asset, aircraft, and surroundings.
Real-Time Distance Awareness
High-frequency ranging (20 ms updates) helps operators maintain safer working distances and improve control near surfaces.
Wide-Angle Cleaning Coverage
Precision direction control and large-angle adjustment help cover edges, corners, and structural blind spots efficiently.
Fast Deployment & Simple Operation
Designed for quick field setup and calibration so teams can start washing sooner and repeat tasks consistently.
Modular Nozzles for Different Soil Types
Quick-change nozzles support different cleaning needs—from light dust removal to tougher contamination.
Aerial Cleaning Solutions for Different Operations
Below are four typical asset categories where aerial washing improves accessibility, safety, and coverage. Select your use case to see how the system fits into your maintenance workflow.
Aerial Washing System That’s Easy to Deploy—and Easy to Repeat
Designed for equipment buyers and O&M teams, this aerial washing system focuses on repeatability: quick setup, controlled close-range operation, and consistent coverage across different assets—PV, wind, grid structures, and large roofs.
Solar Panel / PV Drone Cleaning
Maximize energy yield with a safer, more efficient aerial washing solution. AP30-P4H is designed for drone cleaning for PV solar panel sites, delivering consistent coverage across large photovoltaic arrays while reducing the risk of panel stress and potential micro-crack formation caused by improper cleaning.
For rooftops and utility-scale solar farms, cleaning solar panel use drone solutions improves access and safety. With stable close-range control, O&M teams can reduce manual work-at-height exposure and maintain predictable cleaning results.
Common challenges
- Dust and fine particles causing soiling losses and reduced output
- Bird droppings and localized contamination that are slow to remove manually
- Hard-to-access arrays (rooftop PV, uneven terrain, hillside installations)
How the system helps
- Stable posture during washing helps deliver more consistent panel coverage
- Direction control helps reach panel edges, gaps, and mounting-adjacent areas
- Modular nozzles help match washing intensity to different contamination types
Typical use cases
- Warehouses, factories, and commercial buildings
- Large flat roofs and metal roofs (confirm material compatibility in your deployment plan)
- High-Efficiency Output: Equipped with a 30L high-capacity tank, the system supports continuous operation, reducing landing frequency for refills.
- Smart Pressure Control: Adjustable pressure (0-10 Mpa) allows you to switch between gentle rinsing for dust and high-pressure washing for bird droppings or stubborn grime.
- Automated Path Planning: Supports integration with flight control systems for fully automated, repeatable cleaning routes on large solar farms.
Wind Turbine Blade Drone Cleaning
Reduce downtime and eliminate the risks of manual rope access. The AP30-P4H provides a stable platform for maintaining wind power assets at extreme heights.
Wind assets demand careful, controlled operations at height. This aerial washing system is designed to help teams clean curved blade surfaces and tower sections with stabilized control and wide-angle coverage—reducing reliance on high-risk access methods.
Common challenges
- Dirt, insects, and salt contamination impacting aerodynamic performance
- Safety and logistics complexity of working at height
- The need for fast maintenance windows and repeatable workflows
How the system helps
- Stabilized washing helps maintain control under spray recoil near large structures
- Wide-angle adjustment supports coverage on curved surfaces and hard angles
- Real-time distance awareness supports safer close-range washing operations
Typical use cases
- Blade surface washing during scheduled O&M windows
- Wind tower exterior washing
- Wind & Recoil Resistance:
- The Tactile AI actively counters wind gusts and the backward force of high-pressure spraying, ensuring the drone stays locked on target.
- De-icing & Maintenance:
- Beyond cleaning, the modular nozzle system allows for the application of de-icing fluids during winter operation.
- Blade Protection:
- Capable of applying protective coatings to the leading edge (optional painting module available), extending the lifespan of the turbine blades.
Ready to Upgrade Your Cleaning Workflow?
Get a quote, recommended configuration, and lead time—sent to your inbox.
Insulator & Transmission Tower Drone Washing
A specialized solution for the utility sector. Safely remove pollution, salt spray, and contaminants from high-voltage infrastructure to prevent flashovers.
Grid assets are often located in challenging terrain and high-risk environments. This aerial washing system supports efficient washing on towers and insulator areas with distance awareness, stabilized control, and modular washing tools—helping reduce time spent on hazardous access.
Common challenges
- Contamination that can increase flashover risk and maintenance urgency
- Difficult access to towers and elevated structures
- Tight geometry requiring careful distance control
How the system helps
- High-frequency distance awareness supports controlled operations around structures
- Compliant safety buffer helps reduce risk during close-proximity work
- Modular setup supports different washing intensities for different surfaces
- 50Hz Laser Ranging: A built-in laser module measures the distance between the nozzle and the tower every 20ms, ensuring a precise and safe operating gap.
- Dead-Zone Coverage: The robotic arm features a 90° horizontal and 20° vertical adjustment range, allowing operators to clean the back of insulators and complex tower structures easily.
- Live-Line Safety: Designed for non-contact cleaning (or safe distance cleaning) to maintain grid reliability without shutting down power.
Roof Drone Cleaning
Large roofs are time-consuming—and often risky—to clean manually. This system supports high-coverage aerial washing for industrial and commercial roofs, especially where access, height, or roof conditions make manual cleaning inefficient.
Upgrade your exterior cleaning business. The AP30-P4H is the ultimate tool for soft washing roofs, cleaning high-rise facades, and maintaining commercial buildings.
Common challenges
- Dust, soot, and bird contamination on large roof areas
- Manual access risk and operational disruption
- Obstacles and edges that create cleaning blind spots
How the system helps
- Wide-angle direction control supports coverage near edges and obstacles
- Large onboard capacity helps reduce interruptions from frequent refills
- Fast deployment supports facility maintenance schedules
Typical use cases
- Warehouses, factories, and commercial buildings
- Large flat roofs and metal roofs (confirm material compatibility in your deployment plan)
- Soft Wash Ready: Perfect for applying chemical treatments to remove moss, algae, and lichen from asphalt shingles or tiles.
- Facade & Glass: The "Native Collision Safety" feature gives operators the confidence to clean glass skyscrapers and windows at close range without fear of shattering surfaces.
- Complex Geometries: The flexible arm adapts to curved architecture, domes, and hard-to-reach gutters that rigid drones cannot access.
F.A.Q
Answers to the most common concerns—before deployment.
What this system for ?
This is equipment (aerial washing system). We support sales, integration, and technical documentation.
What drones is the AP30-P4H compatible with?
The system is developed based on the DJI Payload SDK, ensuring native, plug-and-play compatibility with the DJI FlyCart 30. While optimized for the FlyCart 30, our modular architecture allows for integration with other heavy-lift drone platforms. Please contact our technical team to discuss specific custom integration requirements.
How does the "Native Collision Safety" work?
Unlike rigid booms that break or crash upon impact, our Pliabot® flexible joint technology mechanically absorbs shock (buffering up to 50N of force). This protects the drone's motors and the surface being cleaned, allowing for safer close-range work.
Is it difficult to operate?
No. The system integrates with standard flight controls. It supports one-person operation (flying + spraying) and includes automated features like path planning and automatic sweep spraying to reduce pilot fatigue.
What is the benefit of the Laser Ranging feature?
The 50Hz laser sensor provides real-time distance data. This is critical for maintaining a consistent spraying distance for uniform cleaning and preventing accidental collisions with high-voltage equipment.
What types of contamination can it handle?
Typical targets include dust, bird droppings, and oily stains, supported by quick-change nozzle options and adjustable output settings.
How fast is deployment ?
Field setup is designed to be fast, with typical readiness achievable in around 10 minutes depending on site conditions and required checks.
We’ll be glad to hear from you
info@drone-payload.com